Normal 0
We all know that gas prices are through the roof and without a doubt will continue to rise. But what if there was a way to save money on gas, big money? There is and it's done with a little help from water. Did you know that there is technology you can use to almost completely run your car on water now? There is and it can save you a ton of money on gas every month. This technology can teach you how to make your own low-cost hybrid car that runs on water and gas. It is necessary for us to look for other alternatives as the price of crude oil and gas is soaring high. Now the question arises whether a car can really run on water mixed gas. The researchers are doing a research on this and they claim that it is possible to run a car on water mixed gas. They say that with the addition of certain quantity of water with gas it is possible to make a fuel that can meet a common man’s expectations. However it needs a slight modification in the engine by adding on small equipment that will serve the demand of the new fuel.
According to the research if a small quantity of water is added to petrol, diesel or gasoline with the addition of necessary additives, the water gets mixed with the conventional fuel and can act as an effective fuel for the vehicles. This new fuel will not only reduce the cost but also reduce the pollution and will protect the environment. As we cannot ignore the fact that water causes rust to the steel and other parts of the engine that are made up of iron and steel, so chemicals that prevent water from causing rust to the steel, must be added to the fuel.
If the car runs on the water gas fuel, it will not only enhance the performance of the car but also minimize carbon deposits in piston and skirts will reduce sludge and varnish formation. Not only this, it will also reduce the engine temperature, due to the presence of water in the fuel. Also, the car will act itself as a catalytic converter if it gets water gas as a fuel. It is advantageous to run a car on water gas but the water and gas ratio should be optimized and proper chemicals called additives should be added so that water does not remain in free form, as it may cause rust to the steel parts of the engine. This effective process requires the help of experts, as we alone cannot get this process done.
By using this technology you can literally save over $1,000 a year as a sole driver. The more drivers you have, the more you will save. If you own a company with a fleet of trucks, say 50, your looking at a savings of over $50,000 a year!
To find out more about using water to run your car and get a free question and answer report please visit www.RunCar-OnWater.com
